Vandal Resistant Intercom Assemblies
| Description | Model # | Brochure | Spec | Wiring | |
|---|---|---|---|---|---|
The Quam CISx/xx is a complete vandal-resistant call-in
station with integral speaker/microphone and momentary,
normally open, push-to-call button. The faceplate is 12 gauge, brushed stainless steel with tamper-resistant, #6-32 ’pin-in-hex’ hardware. An optional, red mushroom button can be substituted at extra cost at the time of order. The Quam CIS4/xx is a 2-gang wide format. The Quam CIS2/xx is a 3-gang wide format. The impedance can be 8 or 45 Ohm voice coil or a 25V multi-tap transformer. The CIS2 and CIS 4 are weather-resistant. Other transformer options are available via special order. |
CIS2 CIS4 |
|
|
|
|
The Quam CISx/xx is a vandal-resistant, ’listen-only’ station
with integral loudspeaker. The faceplate is 12 gauge, brushed stainless steel with tamper-resistant, #6-32 ’pin-in-hex’ hardware. The Quam CIS6/xx is a 3-gang wide format. The Quam CIS8/xx is a 2-gang wide format. The impedance can be 8 or 45 Ohm voice coil or a 25V multi-tap transformer. Other transformer options are available. The CIS6 and CIS8 are weather-resistant. |
CIS6 CIS8 |
|
|||
The Quam DTSx desktop communications console is a vandal-resistant,
microphone / loudspeaker assembly with push-to-talk
(PTT) mushroom button switch. The loudspeaker baffle is 12 gauge, brushed stainless steel with vandal-resistant internal baffle; enclosure is 16 gauge CRS with ‘pin-in-hex’ hardware. The console finish is a black baked epoxy hybrid finish. The DTS1 has an 18 inch replaceable metal gooseneck and dynamic microphone. The DTS2 has a flush mounted electret microphone. |
DTS1 DTS2 |
|
|||