The Quam CIS Series is a vandal resistant, call-in station with integral speaker/microphone and momentary, normally open, push-to-call button. The faceplate is 12 gauge, brushed, stainless steel with tamper-resistant, #6-32 ’pin-in-torx’ hardware.

The faceplate is 12 gauge, brushed, stainless steel with tamper-resistant, #6-32 ’pin-in-torx’ hardware. An optional, red mushroom button can be substituted at extra cost at the time of order.

The CIS4 is a two-gang and the CIS2 is three-gang format. The CIS2 and CIS 4 are weather-resistant. The impedance can be 8 or 45 Ohm voice coil or a 25V multi-tap transformer. Other transformer options are available via special order.

An optional, red mushroom button can be substituted at extra cost at the time of order.

The Quam CIS Series is a vandal resistant, call-in station with integral speaker/microphone and momentary, normally open, push-to-call button. The faceplate is 12 gauge, brushed, stainless steel with tamper-resistant, #6-32 ’pin-in-torx’ hardware.

The faceplate is 12 gauge, brushed, stainless steel with tamper-resistant, #6-32 ’pin-in-torx’ hardware. An optional, red mushroom button can be substituted at extra cost at the time of order.

The CIS12 is a single-gang format intended for indoor use. The impedance can be 8 or 45 Ohm voice coil or a 25V multi-tap transformer. Other transformer options are available via special order.

An optional, red mushroom button can be substituted at extra cost at the time of order.

The Quam CIS6 and CIS8 are vandal resistant, ’listen-only’ station with integral loudspeakers. The faceplate is 12 gauge, brushed, stainless steel with tamper-resistant, #6-32 ’pin-in-torx’ hardware.

The CIS6 is a two-gang and the CIS8 is three-gang format. Both are weather-resistant.

The impedance can be 8 or 45 Ohm voice coil or a 25V multi-tap transformer. Other transformer options are available via special order.

The Quam DTS Series is a desktop communications console with a vandal resistant, microphone and loudspeaker assembly with push-to-talk (PTT) mushroom button switch.

The loudspeaker baffle is 12 gauge, brushed, stainless steel with vandal resistant internal baffle; enclosure is 16 gauge CRS with ‘pin-in-torx’ hardware. The console finish is a black baked epoxy hybrid finish.

The DTS1 has an 18 inch replaceable metal gooseneck and dynamic microphone. The DTS3 version is the DTS1 console, less microphone; supplied by others.

The Quam DTS Series is a desktop communications console with a vandal resistant, microphone and loudspeaker assembly with push-to-talk (PTT) mushroom button switch.

The loudspeaker baffle is 12 gauge, brushed, stainless steel with vandal resistant internal baffle; enclosure is 16 gauge CRS with ‘pin-in-torx’ hardware. The console finish is a black baked epoxy hybrid finish.

The DTS2 has a flush mounted electret microphone.

The Quam RSP1 is a 32-circuit, relay operated, selection panel that is used between control equipment and individual simplex call-in field stations. Additional units may be added for future expansion. Device is NOT vandal resistant. It is typically rack mounted in a secure environment.